|
|
UAB Topkodas
Products >> Home Door Window Motion ***ector Burglar Entry Sec
Build Your Online Product Catalogs?
| Product Name: |
Home Door Window Motion ***ector Burglar Entry Sec
|
| Supply Ability: |
|
| Related proudcts |
access control, security system, smart home house, |
| Specifications |
Contact ID to SMS converter |
| Price Term: |
FOB |
| Port of loading: |
Lithuania |
| Minimum Order |
10 |
| Unit Price: |
113$ |
|
A lot of security control panels are able to transfer events to the security monitoring stations via PSTN land phone line via Contact ID protocol. These messages help to quickly find out where the event took place and what kind of event is it, e.g. triggered sensor, security system in ARM state, security system troubles, network failure etc.
However a lot of security control panels are not able to send SMS to a user to inform about alarms and other events of the security system. To solve this problem the module GTCOM has been developed, which can simulate PSTN line, receive DTMF Contact ID messages and convert them into readable format as well as to send SMS message to a user via GSM network.
Preparation to operate
Before or after installation of the module it is necessary to configure its parameters. SIM card settings may be configured by using only GSM phone.
How to prepare the module to operate:
- Connect system connector, GSM antenna.
- Connect power supply source: 10-15V battery or stabilized 10-15V/1A power supply source.
- Check and if necessary enter SMS message centre number (using GSM phones). Mostly SIM card already has SMS centre number inserted, please skip this step.
- Remove PIN code request of the SIM card (only with GSM phones).
- Install SERA configuration program.
- Connect USB cable to the PC and to the module.
- Launch SERA program. Guidelines on how to use SERA program is available in SERA description.
- GSM communication strength, IMEI and SMS centre number are available in Test window (see SERA
description).
- Configure telephone numbers to which information should be transferred;
- Set the numbers to send SMS and to make a call;
- Set active inputs, which will be used;
- Set periodicity of communication test;
- Set input parameters.
- Set output OUT1, OUT2, OUT3, OUT4 states (if applied);
There are two types to configure the module. The first �via SMS messages. The second �via PC, |
| Company: |
UAB Topkodas
|
| Contact: |
Ms. Zivile Kalsyte |
| Address: |
Vetrunges str 20 |
| Postcode: |
|
| Tel: |
+37065558449 |
| Fax: |
+370-621-67590 |
| E-mail: |
|
|
|
|
Home
